Monday, November 16, 2015

1934 Waco YKC Voltage Regulator

CAP is proud to support the restoration of this beautiful 1934 Waco YKC, by John M. Patterson, MD.  When John finally found an aircraft voltage regulator compatible with his Type B Generator, he needed approved data allowing its installation in the airplane.  CAP worked in collaboration with the regulator supplier Zeftronics to substantiate the part with the necessary compliance.  Call CAP today for any of your Vintage Airplane certification needs. 

1934 Waco YKC beautifully restored by John M. Patterson, MD



Saturday, October 31, 2015

Waco QCF-2 Modifications - Curtiss Aldrich

Here are some photos of a recent restoration of a Waco QCF-2 by Curtiss Aldrich of Big Oak Flat, CA.  CAP is proud to support outstanding restorations such as this to "Keep the Antiques Flying".

Waco QCF-2 by Curtiss Aldrich

Continental W670 in Waco QCF-2 by Curtiss Aldrich

Waco QCF-2 by Curtiss Aldrich

Waco QCF-2 by Curtiss Aldrich
Waco QCF-2 by Curtiss Aldrich

Waco QCF-2 by Curtiss Aldrich

Waco QCF-2 by Curtiss Aldrich





Piper Modifications

Here are some photos of outstanding work performed on Piper airplanes by some of our talented customers over the past year or so.  CAP is proud to support custom restorations that "Keep the Antiques Flying".

Piper J5-A Panel work by Mix Aircraft, Mulino, OR
Custom Electrical System - Piper J5-A by Mix Aircraft, Mulino, OR
Custom Fuel System in Piper J5-A by Mix Aircraft, Mulino, OR

Lycoming O-290 in Piper J5-A by Mix Aircraft, Mulino, OR

Lycoming O-290 in Piper J5-A by Mix Aircraft, Mulino, OR

Lycoming O-290 in Piper J5-A by Mix Aircraft, Mulino, OR
Custom Fuel System Piper J-3C65 by Ted Davis

Custom Fuel System Piper J-3C65 by Ted Davis

Custom Fuel System Piper J-3C65 by Ted Davis

Custom Fuel System Piper J-3C65 by Ted Davis
Custom Fuel System Piper J-3C65 by Ted Davis

Taylorcraft Modifications

Here are some pictures of beautiful Taylorcraft restoration work by some of our talented customers.  All of these airplanes were supported by CAP over the past year or so.  We appreciate working with our valued customers to "Keep the Antiques Flying"!

C85-12 installed on Taylorcraft BC12-65, Paul Ollman

1941 Taylorcraft BC12-65, Paul Ollman (left) and 1946 BC12-D, Craig Bailey

1941 Taylorcraft BC12-65, Paul Ollman


C-150 Exhaust on Taylorcraft F19 - John Biornstad

C-150 Exhaust on Taylorcraft F19 - John Biornstad

C-150 Exhaust on Taylorcraft F19 - John Biornstad

C-150 Exhaust on Taylorcraft F19 - John Biornstad
Taylorcraft BC12-D - Jerry Lane

Custom Electrical System - Taylorcraft BC12-D - Jerry Lane

Taylorcraft BC12-D - Jerry Lane
Cont. O-200A de-rated for 85 hp on Taylorcraft BC12-D - Jerry Lane

C-150 Brakes on Taylorcraft BC12-65 - David Fogerty
Taylorcraft BC12-65 - David Fogerty

Aeronca Exhaust on Taylorcraft BC12-D - Al McDonald
Aeronca Exhaust on Taylorcraft BC12-D - Al McDonald

Taylorcraft BC12-D Tim Hicks

Wing mods for Gross Wt. Increase - Taylorcraft BC12-D Tim Hicks

Wing mods for Gross Wt. Increase - Taylorcraft BC12-D Tim Hicks
Machining Phenolic Bushings - Taylorcraft BC12-D Tim Hicks
Wing mods for Gross Wt. Increase - Taylorcraft BC12-D Tim Hicks

Wednesday, February 11, 2015

Projects Worked

The year 2013 was very busy for CAP.  But 2014 was almost over the top.  It was a good year for us.  Thanks to a lot of good help and our patient and generous customers, we have managed to serve the needs of most of our clientele.  Here are the past two years projects we completed at a glance.



This should help folks understand the kind of work we can support. If you don't see it here though, give us a call anyway... we are not afraid of new challenges.

Again... we are appreciative of all the work that has come our way.  We will continue doing our best to "Keep the Antiques Flying"!!